Hey there!
We have added Repetier support. To select that for your printer, download and launch our latest software, make sure your printer is plugged in and turned on and navigate to your “Printers” Tab.
From there click settings and select your firmware type:
In your case, select Repetier:
and you should be good to go, any issues let us know!
The Software is not detecting my printer, it is running Repetier host. But the software is not detecting my printer. As of right now it says i cant upload images because i’m a new user, i have a few screenshots of whats happening.
UPDATE: Repetier Host finds the printer just fine, but 3DPrinterOS cant seem to find it. The Buadrate of the printer is 230400. I dont know why this isnt working.
Hey Josh, reach out to me direct at aaron@3dprinteros.com and we can hop on skype (my username is amr05008) to discuss further. Being that you have the flashed XYZ there may be some other variables we need to look at.
Best,
Aaron
I would like to see the Draken from 3DFacture added but this printer is an DLP printer so it works with a projector… I would love to make it wireless with the raspberry pi
The Printrbot Play. It has basicly the same setting as the Printrbot Metal Simple but a smaller build platform (100mm x100mm x 130mm). Thank you!
I have 5 flashforge dreamers that i would like to try with 3DprinterOS. Will this type be added soon?
Hello Valens,
The Flashforge Dreamer is being integrated, although due to its unstable protocol, we have no timeline for it.
I can’t change the printrbot settings tot repetier host. The button doesn’t work.
Hello Mahamed,
What button are you referring to?
My vote goes to MendelMax 3
I have Megatronics 2.0 board, running Marlin 1.0.5
Will you add support for the Zortrax m200?
We will be adding this in the future.
How about the Atom 2.0 or the 3DP-1000. We will be adding these to our selection of printers here.
Would be really nice if you guys could get the Hyvision Cubicon Single working.
Support for Craftbot Plus would be great. Although it does not have Marlin based firmware it adheres to standard G and M codes and been integrated succesfully with Octoprint and Astroprint already.
this printer is integrated now
this printer is integrated now
The Dagoma Discovery 200 works with the Generic MArlin profile but it would be nice if you can integrate it directly. I have filled the integration form with its parameters
