Makerbot Replicator 2, sender not supported

Greetings,

After a few months of having a broken extruder, I’ve finally fixed my printer and have it printing again from the SD card.

I installed the latest generic 3dprinteros on a Raspberry Pi 2, I setup Wifi, camera, and plugged the printer in. It seems to recognize the printer for a split second, then claims to be unsupported.

I keep receiving this message from the logs, errors in the web gui:

{‘error’: [{‘is_blocking’: True, ‘message’: u’Printer type makerbot_sender not supported by our version of 3DPrinterOS client.’, ‘code’: 128}]}

It seems the Makerbor Replicator 2 should be supported. Here’s the full logs:

`INFO 2016-09-23 03:58:55,384 MainThread/main_loop Removing {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’} from printer list
INFO 2016-09-23 03:58:50,856 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/run Printer interface was stopped
DEBUG 2016-09-23 03:58:50,854 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/run Answer: {u’command’: None}
{‘error’: [{‘is_blocking’: True, ‘message’: u’Printer type makerbot_sender not supported by our version of 3DPrinterOS client.’, ‘code’: 128}]}
[u’KW6iVrweUK4Yjujn2mhEZp8SzAJAim2X307dFdPDxfjeScX70okfBQNq5uWXp6LEI9hSSx0C3TN9jFIyQW21GEfs88cGvZmE3rNQJJqhx7VwGvFW4wN7cFDp7vRYC5s0’, {‘state’: ‘error’}, None]
DEBUG 2016-09-23 03:58:50,757 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/form_command_request Request:
WARNING 2016-09-23 03:58:50,756 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/register_error Error N128. Printer type makerbot_sender not supported by our version of 3DPrinterOS client.
DEBUG 2016-09-23 03:58:50,754 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect_to_server Setting profile: {u’extruder_count’: 2, u’baudrate’: [115200], u’vids_pids’: [[u’23C1’, u’B015’], [u’23C1’, u’B016’], [u’23C1’, u’B017’]], u’name’: u’Makerbot Replicator 2’, u’alias’: u’R2’, u’min_coords_corner’: u’LN’, u’sender’: u’makerbot_sender’}
INFO 2016-09-23 03:58:50,753 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect_to_server Received answer: {u’printer_profile’: u’{“name”:“Makerbot Replicator 2”,“alias”:“R2”,“sender”:“makerbot_sender”,“extruder_count”:2,“baudrate”:[115200],“vids_pids”:[[“23C1”,“B015”],[“23C1”,“B016”],[“23C1”,“B017”]],“min_coords_corner”:“LN”}’, u’result’: True, u’name’: u’Makerbot’, u’printer_token’: u’KW6iVrweUK4Yjujn2mhEZp8SzAJAim2X307dFdPDxfjeScX70okfBQNq5uWXp6LEI9hSSx0C3TN9jFIyQW21GEfs88cGvZmE3rNQJJqhx7VwGvFW4wN7cFDp7vRYC5s0’}
INFO 2016-09-23 03:58:50,752 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect_to_server Successfully connected to server.
INFO 2016-09-23 03:58:50,751 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/set_groups Groups are set correctly for {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’} []
{}
[‘printer_login’, u’57539e36ccde78.08817004’, {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}]
DEBUG 2016-09-23 03:58:50,619 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect_to_server Printer login request:
INFO 2016-09-23 03:58:50,618 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect Connecting from: 192.168.0.12 00000000376bda48
INFO 2016-09-23 03:58:50,350 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect_to_server Connecting to server with printer: {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}
INFO 2016-09-23 03:58:50,348 MainThread/init New printer interface for {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}
INFO 2016-09-23 03:58:50,346 MainThread/get_possible_printer_types Possible printer types: [{u’extruder_count’: 2, u’baudrate’: [115200], u’vids_pids’: [[u’23C1’, u’B015’], [u’23C1’, u’B016’], [u’23C1’, u’B017’]], u’name’: u’Makerbot Replicator 2’, u’alias’: u’R2’, u’min_coords_corner’: u’LN’, u’sender’: u’makerbot_sender’}, {u’extruder_count’: 2, u’baudrate’: [115200], u’vids_pids’: [[u’23C1’, u’B017’], [u’21C1’, u’B017’], [u’23C1’, u’B015’], [u’23C1’, u’B016’]], u’name’: u’Makerbot Replicator 2X’, u’alias’: u’R2X’, u’min_coords_corner’: u’LN’, u’sender’: u’makerbot_sender’}]
INFO 2016-09-23 03:58:45,311 MainThread/main_loop Removing {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’} from printer list
INFO 2016-09-23 03:58:40,767 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/run Printer interface was stopped
DEBUG 2016-09-23 03:58:40,764 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/run Answer: {u’command’: None}
{‘error’: [{‘is_blocking’: True, ‘message’: u’Printer type makerbot_sender not supported by our version of 3DPrinterOS client.’, ‘code’: 128}]}
[u’KW6iVrweUK4Yjujn2mhEZp8SzAJAim2X307dFdPDxfjeScX70okfBQNq5uWXp6LEI9hSSx0C3TN9jFIyQW21GEfs88cGvZmE3rNQJJqhx7VwGvFW4wN7cFDp7vRYC5s0’, {‘state’: ‘error’}, None]
DEBUG 2016-09-23 03:58:40,647 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/form_command_request Request:
WARNING 2016-09-23 03:58:40,645 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/register_error Error N128. Printer type makerbot_sender not supported by our version of 3DPrinterOS client.
DEBUG 2016-09-23 03:58:40,643 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect_to_server Setting profile: {u’extruder_count’: 2, u’baudrate’: [115200], u’vids_pids’: [[u’23C1’, u’B015’], [u’23C1’, u’B016’], [u’23C1’, u’B017’]], u’name’: u’Makerbot Replicator 2’, u’alias’: u’R2’, u’min_coords_corner’: u’LN’, u’sender’: u’makerbot_sender’}
INFO 2016-09-23 03:58:40,641 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect_to_server Received answer: {u’printer_profile’: u’{“name”:“Makerbot Replicator 2”,“alias”:“R2”,“sender”:“makerbot_sender”,“extruder_count”:2,“baudrate”:[115200],“vids_pids”:[[“23C1”,“B015”],[“23C1”,“B016”],[“23C1”,“B017”]],“min_coords_corner”:“LN”}’, u’result’: True, u’name’: u’Makerbot’, u’printer_token’: u’KW6iVrweUK4Yjujn2mhEZp8SzAJAim2X307dFdPDxfjeScX70okfBQNq5uWXp6LEI9hSSx0C3TN9jFIyQW21GEfs88cGvZmE3rNQJJqhx7VwGvFW4wN7cFDp7vRYC5s0’}
INFO 2016-09-23 03:58:40,639 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect_to_server Successfully connected to server.
INFO 2016-09-23 03:58:40,638 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/set_groups Groups are set correctly for {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’} []
{}
[‘printer_login’, u’57539e36ccde78.08817004’, {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}]
DEBUG 2016-09-23 03:58:40,504 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect_to_server Printer login request:
INFO 2016-09-23 03:58:40,502 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect Connecting from: 192.168.0.12 00000000376bda48
INFO 2016-09-23 03:58:40,272 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect_to_server Connecting to server with printer: {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}
INFO 2016-09-23 03:58:40,270 MainThread/init New printer interface for {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}
INFO 2016-09-23 03:58:40,268 MainThread/get_possible_printer_types Possible printer types: [{u’extruder_count’: 2, u’baudrate’: [115200], u’vids_pids’: [[u’23C1’, u’B015’], [u’23C1’, u’B016’], [u’23C1’, u’B017’]], u’name’: u’Makerbot Replicator 2’, u’alias’: u’R2’, u’min_coords_corner’: u’LN’, u’sender’: u’makerbot_sender’}, {u’extruder_count’: 2, u’baudrate’: [115200], u’vids_pids’: [[u’23C1’, u’B017’], [u’21C1’, u’B017’], [u’23C1’, u’B015’], [u’23C1’, u’B016’]], u’name’: u’Makerbot Replicator 2X’, u’alias’: u’R2X’, u’min_coords_corner’: u’LN’, u’sender’: u’makerbot_sender’}]
DEBUG 2016-09-23 03:58:40,222 MainThread/main_loop 23 Sep 2016 03:58:40
INFO 2016-09-23 03:58:35,216 MainThread/main_loop Removing {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’} from printer list
INFO 2016-09-23 03:58:30,718 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/run Printer interface was stopped
DEBUG 2016-09-23 03:58:30,716 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/run Answer: {u’command’: None}
{‘error’: [{‘is_blocking’: True, ‘message’: u’Printer type makerbot_sender not supported by our version of 3DPrinterOS client.’, ‘code’: 128}]}
[u’KW6iVrweUK4Yjujn2mhEZp8SzAJAim2X307dFdPDxfjeScX70okfBQNq5uWXp6LEI9hSSx0C3TN9jFIyQW21GEfs88cGvZmE3rNQJJqhx7VwGvFW4wN7cFDp7vRYC5s0’, {‘state’: ‘error’}, None]
DEBUG 2016-09-23 03:58:30,599 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/form_command_request Request:
WARNING 2016-09-23 03:58:30,598 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/register_error Error N128. Printer type makerbot_sender not supported by our version of 3DPrinterOS client.
DEBUG 2016-09-23 03:58:30,596 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect_to_server Setting profile: {u’extruder_count’: 2, u’baudrate’: [115200], u’vids_pids’: [[u’23C1’, u’B015’], [u’23C1’, u’B016’], [u’23C1’, u’B017’]], u’name’: u’Makerbot Replicator 2’, u’alias’: u’R2’, u’min_coords_corner’: u’LN’, u’sender’: u’makerbot_sender’}
INFO 2016-09-23 03:58:30,595 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect_to_server Received answer: {u’printer_profile’: u’{“name”:“Makerbot Replicator 2”,“alias”:“R2”,“sender”:“makerbot_sender”,“extruder_count”:2,“baudrate”:[115200],“vids_pids”:[[“23C1”,“B015”],[“23C1”,“B016”],[“23C1”,“B017”]],“min_coords_corner”:“LN”}’, u’result’: True, u’name’: u’Makerbot’, u’printer_token’: u’KW6iVrweUK4Yjujn2mhEZp8SzAJAim2X307dFdPDxfjeScX70okfBQNq5uWXp6LEI9hSSx0C3TN9jFIyQW21GEfs88cGvZmE3rNQJJqhx7VwGvFW4wN7cFDp7vRYC5s0’}
INFO 2016-09-23 03:58:30,594 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect_to_server Successfully connected to server.
INFO 2016-09-23 03:58:30,593 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/set_groups Groups are set correctly for {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’} []
{}
[‘printer_login’, u’57539e36ccde78.08817004’, {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}]
DEBUG 2016-09-23 03:58:30,430 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect_to_server Printer login request:
INFO 2016-09-23 03:58:30,429 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect Connecting from: 192.168.0.12 00000000376bda48
INFO 2016-09-23 03:58:30,178 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect_to_server Connecting to server with printer: {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}
INFO 2016-09-23 03:58:30,175 MainThread/init New printer interface for {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}
INFO 2016-09-23 03:58:30,173 MainThread/get_possible_printer_types Possible printer types: [{u’extruder_count’: 2, u’baudrate’: [115200], u’vids_pids’: [[u’23C1’, u’B015’], [u’23C1’, u’B016’], [u’23C1’, u’B017’]], u’name’: u’Makerbot Replicator 2’, u’alias’: u’R2’, u’min_coords_corner’: u’LN’, u’sender’: u’makerbot_sender’}, {u’extruder_count’: 2, u’baudrate’: [115200], u’vids_pids’: [[u’23C1’, u’B017’], [u’21C1’, u’B017’], [u’23C1’, u’B015’], [u’23C1’, u’B016’]], u’name’: u’Makerbot Replicator 2X’, u’alias’: u’R2X’, u’min_coords_corner’: u’LN’, u’sender’: u’makerbot_sender’}]
INFO 2016-09-23 03:58:25,118 MainThread/main_loop Removing {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’} from printer list
INFO 2016-09-23 03:58:20,597 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/run Printer interface was stopped
DEBUG 2016-09-23 03:58:20,595 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/run Answer: {u’command’: None}
{‘error’: [{‘is_blocking’: True, ‘message’: u’Printer type makerbot_sender not supported by our version of 3DPrinterOS client.’, ‘code’: 128}]}
[u’KW6iVrweUK4Yjujn2mhEZp8SzAJAim2X307dFdPDxfjeScX70okfBQNq5uWXp6LEI9hSSx0C3TN9jFIyQW21GEfs88cGvZmE3rNQJJqhx7VwGvFW4wN7cFDp7vRYC5s0’, {‘state’: ‘error’}, None]
DEBUG 2016-09-23 03:58:20,477 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/form_command_request Request:
WARNING 2016-09-23 03:58:20,475 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/register_error Error N128. Printer type makerbot_sender not supported by our version of 3DPrinterOS client.
DEBUG 2016-09-23 03:58:20,473 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect_to_server Setting profile: {u’extruder_count’: 2, u’baudrate’: [115200], u’vids_pids’: [[u’23C1’, u’B015’], [u’23C1’, u’B016’], [u’23C1’, u’B017’]], u’name’: u’Makerbot Replicator 2’, u’alias’: u’R2’, u’min_coords_corner’: u’LN’, u’sender’: u’makerbot_sender’}
INFO 2016-09-23 03:58:20,471 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect_to_server Received answer: {u’printer_profile’: u’{“name”:“Makerbot Replicator 2”,“alias”:“R2”,“sender”:“makerbot_sender”,“extruder_count”:2,“baudrate”:[115200],“vids_pids”:[[“23C1”,“B015”],[“23C1”,“B016”],[“23C1”,“B017”]],“min_coords_corner”:“LN”}’, u’result’: True, u’name’: u’Makerbot’, u’printer_token’: u’KW6iVrweUK4Yjujn2mhEZp8SzAJAim2X307dFdPDxfjeScX70okfBQNq5uWXp6LEI9hSSx0C3TN9jFIyQW21GEfs88cGvZmE3rNQJJqhx7VwGvFW4wN7cFDp7vRYC5s0’}
INFO 2016-09-23 03:58:20,470 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect_to_server Successfully connected to server.
INFO 2016-09-23 03:58:20,468 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/set_groups Groups are set correctly for {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’} []
{}
[‘printer_login’, u’57539e36ccde78.08817004’, {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}]
DEBUG 2016-09-23 03:58:20,329 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect_to_server Printer login request:
INFO 2016-09-23 03:58:20,328 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect Connecting from: 192.168.0.12 00000000376bda48
INFO 2016-09-23 03:58:20,072 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect_to_server Connecting to server with printer: {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}
INFO 2016-09-23 03:58:20,070 MainThread/init New printer interface for {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}
INFO 2016-09-23 03:58:20,067 MainThread/get_possible_printer_types Possible printer types: [{u’extruder_count’: 2, u’baudrate’: [115200], u’vids_pids’: [[u’23C1’, u’B015’], [u’23C1’, u’B016’], [u’23C1’, u’B017’]], u’name’: u’Makerbot Replicator 2’, u’alias’: u’R2’, u’min_coords_corner’: u’LN’, u’sender’: u’makerbot_sender’}, {u’extruder_count’: 2, u’baudrate’: [115200], u’vids_pids’: [[u’23C1’, u’B017’], [u’21C1’, u’B017’], [u’23C1’, u’B015’], [u’23C1’, u’B016’]], u’name’: u’Makerbot Replicator 2X’, u’alias’: u’R2X’, u’min_coords_corner’: u’LN’, u’sender’: u’makerbot_sender’}]
INFO 2016-09-23 03:58:15,020 MainThread/main_loop Removing {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’} from printer list
INFO 2016-09-23 03:58:10,458 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/run Printer interface was stopped
DEBUG 2016-09-23 03:58:10,455 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/run Answer: {u’command’: None}
{‘error’: [{‘is_blocking’: True, ‘message’: u’Printer type makerbot_sender not supported by our version of 3DPrinterOS client.’, ‘code’: 128}]}
[u’KW6iVrweUK4Yjujn2mhEZp8SzAJAim2X307dFdPDxfjeScX70okfBQNq5uWXp6LEI9hSSx0C3TN9jFIyQW21GEfs88cGvZmE3rNQJJqhx7VwGvFW4wN7cFDp7vRYC5s0’, {‘state’: ‘error’}, None]
DEBUG 2016-09-23 03:58:10,340 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/form_command_request Request:
WARNING 2016-09-23 03:58:10,338 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/register_error Error N128. Printer type makerbot_sender not supported by our version of 3DPrinterOS client.
DEBUG 2016-09-23 03:58:10,336 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect_to_server Setting profile: {u’extruder_count’: 2, u’baudrate’: [115200], u’vids_pids’: [[u’23C1’, u’B015’], [u’23C1’, u’B016’], [u’23C1’, u’B017’]], u’name’: u’Makerbot Replicator 2’, u’alias’: u’R2’, u’min_coords_corner’: u’LN’, u’sender’: u’makerbot_sender’}
INFO 2016-09-23 03:58:10,335 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect_to_server Received answer: {u’printer_profile’: u’{“name”:“Makerbot Replicator 2”,“alias”:“R2”,“sender”:“makerbot_sender”,“extruder_count”:2,“baudrate”:[115200],“vids_pids”:[[“23C1”,“B015”],[“23C1”,“B016”],[“23C1”,“B017”]],“min_coords_corner”:“LN”}’, u’result’: True, u’name’: u’Makerbot’, u’printer_token’: u’KW6iVrweUK4Yjujn2mhEZp8SzAJAim2X307dFdPDxfjeScX70okfBQNq5uWXp6LEI9hSSx0C3TN9jFIyQW21GEfs88cGvZmE3rNQJJqhx7VwGvFW4wN7cFDp7vRYC5s0’}
INFO 2016-09-23 03:58:10,333 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect_to_server Successfully connected to server.
INFO 2016-09-23 03:58:10,332 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/set_groups Groups are set correctly for {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’} []
{}
[‘printer_login’, u’57539e36ccde78.08817004’, {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}]
DEBUG 2016-09-23 03:58:10,206 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect_to_server Printer login request:
INFO 2016-09-23 03:58:10,205 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect Connecting from: 192.168.0.12 00000000376bda48
INFO 2016-09-23 03:58:09,980 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/connect_to_server Connecting to server with printer: {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}
INFO 2016-09-23 03:58:09,977 MainThread/init New printer interface for {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}
INFO 2016-09-23 03:58:09,976 MainThread/get_possible_printer_types Possible printer types: [{u’extruder_count’: 2, u’baudrate’: [115200], u’vids_pids’: [[u’23C1’, u’B015’], [u’23C1’, u’B016’], [u’23C1’, u’B017’]], u’name’: u’Makerbot Replicator 2’, u’alias’: u’R2’, u’min_coords_corner’: u’LN’, u’sender’: u’makerbot_sender’}, {u’extruder_count’: 2, u’baudrate’: [115200], u’vids_pids’: [[u’23C1’, u’B017’], [u’21C1’, u’B017’], [u’23C1’, u’B015’], [u’23C1’, u’B016’]], u’name’: u’Makerbot Replicator 2X’, u’alias’: u’R2X’, u’min_coords_corner’: u’LN’, u’sender’: u’makerbot_sender’}]
DEBUG 2016-09-23 03:58:09,935 MainThread/main_loop 23 Sep 2016 03:58:09
INFO 2016-09-23 03:58:04,927 MainThread/main_loop Removing {‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’} from printer list
INFO 2016-09-23 03:58:00,434 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/run Printer interface was stopped
DEBUG 2016-09-23 03:58:00,431 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/run Answer: {u’command’: None}
{‘error’: [{‘is_blocking’: True, ‘message’: u’Printer type makerbot_sender not supported by our version of 3DPrinterOS client.’, ‘code’: 128}]}
[u’KW6iVrweUK4Yjujn2mhEZp8SzAJAim2X307dFdPDxfjeScX70okfBQNq5uWXp6LEI9hSSx0C3TN9jFIyQW21GEfs88cGvZmE3rNQJJqhx7VwGvFW4wN7cFDp7vRYC5s0’, {‘state’: ‘error’}, None]
DEBUG 2016-09-23 03:58:00,279 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/form_command_request Request:
WARNING 2016-09-23 03:58:00,277 PrinterInterface{‘SNR’: u’A4139373530351B0A131’, ‘COM’: ‘/dev/ttyACM0’, ‘PID’: ‘B015’, ‘VID’: ‘23C1’}/register_error Error N128. Printer type makerbot_sender not supported by our version of 3DPrinterOS client.

`

Hey, is the issue persist? please ping me in skype, my skypeID: antonvedeshin